Comments

• narayan Administrators

  April 2010

  Hi dkelly,
  
  You need to enter the username password for the website. If, without Sahi, you do not explicitly specify it, most probably your windows login credentials were being used.
  
  Try
  windows_username and password
  or
  windows_domain\windows_username and password
  
  Note the backslash between domain and username. Forward slash will not work. Eg.
  MYDOMAIN\dkelly is correct
  MYDOMAIN/dkelly is NOT correct
  
  Regards,
  Narayan
• dkelly Members

  April 2010

  Yes, the windows_domain\username and password was the first thing I tried.
  
  I get the following in the console:
  Apr 6, 2010 1:10:17 PM net.sf.sahi.RemoteRequestProcessor process401
  INFO: scheme=negotiate; realm=null
  
  Is there some other authentication or certificate I should make sure I have?
  
  OR
  Is there some way to authenticate my domain\username when I start up sahi?
• dkelly Members

  April 2010

  Here is the full message from the console after entering my domain\username and password
  >>> Credentials added: negotiate KBHC0\dkelly
  Apr 6, 2010 1:36:09 PM net.sf.sahi.RemoteRequestProcessor process401
  INFO: >>> Negotiate
  Apr 6, 2010 1:36:09 PM net.sf.sahi.RemoteRequestProcessor process401
  INFO: scheme=negotiate; realm=null
• dkelly Members

  April 2010

  I suspect that either the 401 authentication in Sahi doesn't work OR I need some sort of certificate. How can I tell wha the problem is?
• beesman Members

  July 2010

  hi dkelly
  Have you solved the problem? i got the same error ,could you tell me ?
• dkelly Members

  July 2010

  No. In fact, I have put Sahi on hold (i.e. not using it) until this is resolved.
• narayan Administrators

  July 2010

  Hi dkelly,
  
  Specifying the username and password is all it should take to get 401 auth working.
  Could you please post the information you see on Sahi Controller's info tab? Let us check if the environment etc. are fine.
  
  Regards,
  Narayan
• dkelly Members

  July 2010

  I go to the web site then CTRL-ALT-DblClick on the page and I don't get the Sahi Controller as usual. Instead, I get the 401 Authentication Required message:
  
  Scheme: negotiate | Realm: null
  401 Authentication Required
  Generated by Sahi for 401 response
  
  I type in Username KBHC0\dkelly and password then click on Authenticate. Then I get a message that says "to display the webpage again, Internet Explorer needs to resend the information you've previously submitted". Then it displays the authentication prompt all over again. This repeats every time I re-enter username and password. The Controller never opened.
  
  The cmd window shows the following:
  Jul 23, 2010 8:32:54 AM net.sf.sahi.RemoteRequestProcessor process401
  INFO: >>> Negotiate
  Jul 23, 2010 8:32:54 AM net.sf.sahi.RemoteRequestProcessor process401
  INFO: scheme=negotiate; realm=null
  >>> Credentials added: negotiate KBHC0\dkelly
  Jul 23, 2010 8:33:34 AM net.sf.sahi.RemoteRequestProcessor process401
  INFO: >>> Negotiate
  Jul 23, 2010 8:33:34 AM net.sf.sahi.RemoteRequestProcessor process401
  INFO: scheme=negotiate; realm=null
• narayan Administrators

  July 2010

  Hi dkelly,
  
  Can you use the latest build of Sahi and check? There have been a few bug fixes related to spaces at the end of realms, null realms etc.
  
  Regards,
  Narayan
• beesman Members

  August 2010 edited August 2010

  Sahi
  
  Version : V3
  Build : 2010-06-11
  Browser
  
  UserAgent : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; InfoPath.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
  Name : Microsoft Internet Explorer
  Version : 4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; InfoPath.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
  Native XmlHTTPRequest : true
  Is Java enabled : true
  Is cookie enabled : true
  Operating System
  
  Name : Windows XP
  Version : 5.1
  Architecture : x86
  Is process list available : true
  Java
  
  Java Installed Directory : C:\Program Files\Java\jre6
  JRE Version : 1.6.0_20
  Is keytool available : true
  

  import java.rmi.RemoteException;
  import javax.servlet.ServletConfig;
  import javax.servlet.ServletException;
  import javax.servlet.http.HttpServlet;
  import javax.servlet.http.HttpServletRequest;
  import javax.servlet.http.HttpServletResponse;
  import javax.sql.DataSource;
  import javax.xml.rpc.ServiceException;
  
  import org.apache.commons.codec.binary.Base64;
  
  public final class AuthDemo extends HttpServlet {
      
      public void init(ServletConfig config) throws ServletException {
          super.init(config);
      }
      
      protected void doGet(HttpServletRequest req, HttpServletResponse resp)
      throws ServletException, IOException
      {
              doPost(req, resp);
      }
  
      public void  doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          request.setCharacterEncoding("windows-31j");
          response.setContentType("text/html; charset=windows-31j");
          String auth = request.getHeader("Authorization");
          if (auth == null)
          {
            response.setStatus(401); 
            response.setHeader("Cache-Control","no-store"); 
            response.setDateHeader("Expires",0); 
            response.setHeader("WWW-authenticate","Basic Realm=\"AuthDemo Server\""); 
            
          } else {
              response.getWriter().print("Authorization :" + request.getHeader("Authorization"));
          }
  
          String encoded = null;
          String decoded = null;
  
           String userName = "";
           String pass = "";
          
          String header = request.getHeader("Authorization");
             if (header != null) {
                 encoded = header.substring(header.indexOf(" ") + 1);
                 decoded = new String(Base64.decodeBase64(encoded.getBytes()));
                 String[]  admin = decoded.split(":");
                 
                  if(admin.length == 2){
                      userName = admin[0];
                      pass = admin[1];
                  }
            }
  
          
          request.getRequestDispatcher("/authDemo.jsp").forward(request, response);
      }
      
  }
  

  
  hi narayan
  could you help me?
  It not works
  
  I set breakpoint in first line of doGet() and doPost() , never executed.
  if i shutdown sahi , it will be executed
• beesman Members

  August 2010

  up
• liprise Members

  August 2010

  Thanks narayan 10#
• Neha Auchar Members

  August 2011

  Anyone got answer to this , even i am facing the same problem .
  
  I am using the latest version of SAHI...
  
  Anyone, Please help me if you have an answer to it.....
• Sumitra Members

  August 2011

  Hi Neha Auchar,
  
  Plese create a new forum post.
  
  Let me know what exactly you are trying to do what is the error message you are getting?
  
  Regards
  Sumitra